Mirafit M200 Power Rack
- Mirafit M200 Power Rack
- Our M200 rack features an uprated 60mm steel frame, more attachment holes and increased protection for both user and barbell.
- Powder coated finish in a choice of black or orange
- Full length safety spotters with UHMW liners - protects against barbell damage
- J-Cups with UHMW liners
- Strong 60mm x 60mm steel frame
- Steel thickness ranges from 2mm right up to 6mm
- 6mm thick steel brace plates on all uprights
- Fully adjustable - 16 levels
- 1" diameter holes spaced at 8cm intervals
- Bolt down feet for extra stability
- Rear base bar position provides increased room for weight bench positioning within the cage
- Straight grip pull up bar suitable for pull ups and muscle ups
- Pull up bar diameter: 32mm with matt black finish.
- Suitable for use with a 7ft or 6ft international barbell. Please note this cage is too wide for a standard 6ft barbell
- Compatible with a range of attachments (see below)
- The foot plates are pre-drilled with 11mm diameter holes but floor fixings are NOT included and will vary depending on your floor type. For masonry floors we recommend our Floor Fixing Kit (sold separately)
- Specification:
- Total Height: 220cm (223cm with cable system fitted). We also offer a shorter 6ft version available here.
- Total Width: 147cm (122cm to outside of uprights)
- Total Depth: 141cm (180cm with cable system fitted)
- Internal Depth: 74cm
- Frame: 60mm X 60mm
- Net weight: 84kg / 185lbs (excluding cable system)
- Barbell Max load: 350kg
How does the M200 rack compare to the M100 rack?
- The M200 is taller and heavier
- The M200 uses larger 60mm steel box sections (the M100 uses 50mm)
- The M200 has thicker steel brace plates
- The M200 has full length UHMW protection on the spotters
- The M200 has more holes for attachments to be added
- The M200 has a larger internal workout space
- The M200 is stronger and has a higher max load
What attachments are available?
Delivery & Assembly
- This product is delivered in 3 boxes
- The courier will often not deliver all of the boxes at the same time. Please wait at least 48 hours for the other boxes to arrive before contacting us
- Assembly instructions are included
- Please note: tools required for assembly are not included but are available here
- During assembly pay special attention to the rear base bar which has two sets of holes. Ensure you follow the assembly diagrams to use the correct set of holes otherwise this will cause alignment issues. The spare holes are in place to accommodate optional weight storage poles.
This product is suitable for use in home gyms or light commercial environments such as personal training studios, small hotels, workplace gyms, physio and rehab centres.
The product is not recommended for use in full commercial gyms or heavy use facilities .
4.9
Share your thoughts with other customers
Top customer reviews
-
Amazing addition to the home gym!!!Lockdown 2.0 saw me get the m2 squat stands. They were great but now with lockdown 3.0 incoming, I needed something a bit more versatile that I could attach things easily too and this power rack is a beast!!!! Genuinely worth every penny. Super easy to set up too.
-
Managed to impress a fussy and particular sod!So for quite some time I have been wanting to purchase a power rack, covid -19 gave me a further incentive to purchase due to the u certainty of lockdown occurring over and over again. To cut it short, me experience from end purchase to delivery was super pleasant. I also had many queries whcih I asked via email (which I’m sure can be quite annoying) however the team answered promptly and all my questions in detail. I was in two minds about purchasing this or not as I am someone who is very difficult to please and very particular. I do many hours of research before purchasing anything in general. Given the price for the product and also the spec such as 2mm steel, I thought its a no brainer. I wasn’t expecting nothing great, just a well built product for good value. Firstly the delivery was incredible, I purchased on a Friday evening and received on Monday. Upon lifting the boxes, I immediately knew this was going to be a solid product, it weighted a tonne!! The boxes were very very well packaged, if anything too we packed it took me ages to unpack. Each part came wrapped in a plastic sheet and then wrapped with bubble wrap and then taped up before being packaged carefully in the box. Setup I was dreading thinking there would be a hundreds different types of bolts. But to my surprise it was only 3 different types of nuts and bolts, all very heavy duty. This made set up very easy, along with the very clearly labelled instructions. I did this on my own and managed, it did take a little longer but it’s still manageable, though I recommend 2 people to put this together. Overall I am very pleased with the build quality and stability over all. I have put it on top of tiles (not ideal) hence a slight wobble and sliding, however I’m 100% confident this won’t budge once I’ve got rubber flooring down. I highly recommend anyone to purchase this, it’s a bargain of a deal. Spend the extra £100 and go for this model rather than the m100 in my opinion. You get a stronger, heavier and better built product!
-
Brilliant centre piece for any home gymI had a mirafit m1 squat rack before upgrading to the m200 power rack. Id wanted to buy the old model but it went out of stock from the panic buyers when lockdown first happened. Waited probably about 8 months for this model to come into stock and im so glad I waited cause the second it came into stock i ordered it. Its incredibly sturdy, doing pullups from the bar feels great. I'm 5'10 and when hanging from the bar I can clear the floor just by pointing my toes slightly forward and engaging my core. Ive tried standard back and front squats as well as pin squats and RDLs, even going heavy feels way safer and more confident due to the spotters. The spotter bars are a little fiddly to insert into place but thats more me than the rack itself. Doing standing shoulder presses inside the rack isnt possible for me at my height, but thats easily sorted by just pressing in front of the rack instead. Delivery was fast, took me a few hours to build it up by myself. id advise to have tools to fit the fixtures, i had to use an adjustable wrench and some pliers which made it slower. Great value for money for this quality. Also there will be a cable machine out soon to go with this which im also going to get as its for a cable machine attachment that i originally intended to buy this rack for. With the amount of attachments that come with, this power rack can easily be the most vital piece of equipment in your whole home gym.
-
Not quite 5 starsGood product, good price. Finish just not quite there. Paint/powder coat not even and started coming away after 1 week. Great functionality just not quite there with the paint work
-
Very good purchase, solid and versatileI bought the cable system version of this about two months ago, and so far it's been great. Delivery was fast, and it was extremely well packaged. It took about 3 hours to build, though was not difficult just a lot of bolts. You will need to people and a lot of space, and a good socket set as no tools ate included - needs a 17" socket. The cage itself is solid as a rock, and well manufactured. I have mine on 0.5 inch foam pads and there is zero movement. The spotters and bar holders are easy to move, and sturdy. I also fitted a landmine to the side, which was easy as its really expandable. Already I'm increasing squat and seated press fast for to the confidence this gives. Only negative is the cable system. The free floating pulley rotates freely, and every other use the cable twists and I have to take it off and straighten it. The stopper at the bottom also seems flimsy ad I was told it can take 100kg, but to lift 100kg on this you'd probably be at athlete level. Overall a great purchase, let down slightly by the cable system design.