Mirafit M230 Squat and Bench Press Rack
- Mirafit M230 Squat and Bench Press Rack
- Available in a choice of colour: black or orange
- 60mm x 60mm powder coated steel frame
- Adjustable barbell rest and spotter heights enable different exercises and correct positioning
- 13 barbell rack levels at 2" intervals
- 13 spotter levels at 1" intervals
- Barbell rests and spotters are UHMW lined to protect both your rack and barbells
- Olympic 2" weight storage poles at the rear of the stand provide convenient weight plate storage
- Supplied with floor fixing brackets
- Suitable for use with either a 7ft barbell or a 6ft international barbell. Not suitable for use with 6ft standard barbells or smaller
- Measurements:
- Total depth: 98cm
- Total height at full extension: 167cm
- Total width including floor fixing brackets: 133cm
- Total width excluding floor fixing brackets: 120cm
- Storage pole length: 20cm
- Spotters:
- Lowest height at which bar can be placed: 62.5cm
- Highest height at which bar can be placed: 92.5cm
- Bar rests:
- Lowest height at which bar can be placed: 92.5cm
- Highest height at which bar can be placed: 152.5cm
This product is designed for use in home gyms. It is not suitable for commercial environments.
4.9
Share your thoughts with other customers
Top customer reviews
-
SuperbThis rack is quality. Really well made, solid and perfect for my home gym. Very happy with it.
-
Just awesomeI bought this squat and bench rack as a replacement for a full power rack, which was very high qualty but took up so much room. After placing my order, it arrived about 40 hours later in two 20kg boxes. For £250 I was expecting the rack to be good, but wow I was really blown away but the quality of it. The rack is heavy duty powder coated box steel, which I put together in 5 minutes flat. It was simple. Using the rack; Easily adjustable squat portion of the rack, with stablilising lockers to prevent the upright squat bars from moving. Nice touch. Bench: funnily enough for me, I set the squat bars up and they are the exact same height I need for benching, so once they are set and locked in place I don't have to ever move them again. The bench spotters are rock solid; I was concerned before I bought the rack that they would wobble about, they don't. Both the squat bars and the spotters are lined with thick protective PVC to ensure your bar isn't damaged. You can use the bench spotters to place the barbell for power cleans and you can use the squat bars to hold the barbell for OH Press. The rack stays in place and doesn't slide around on the floor with the use of the rubber feet. You can pick the rack up and walk it across the floor to get it out of the way as it's only 40kg. All in all this is an excellent solution for a home gym. My Bodycraft power rack was awesome, but this takes up much less room and does everything I need, as I have a Mirafit pullup bar https://mirafit.co.uk/mirafit-multi-grip-pull-up-bar-for-m200-series.html which is also just solid and has all the hand positions you need. I would definitely recommend this rack, as the centre of your home gym, you won't be disappointed. Namaste
-
5 for quality/ 3 for set up (due to fitting issue).Excellent product - super solid and sturdy. Quite heavy (which is great) but the weight of this piece of equipment should be taken into consideration in where you intend to place it. Set up was in general effortless - my lower score for set up was due to the uprights I received were a bit of a pain to fit into the channels - one actually did not fit at first. When I lifted and lowered to adjust they certainly did not look like the video. I extended and rocked the uprights around a bit to widen the opening where the pinching seemed to block or restrict the movement so we'll see if that improves over use as it is a bit tight to move up and down. Initially had to have the wife stand on the floor legs while I tried to pull one of the uprights up as it was stuck. Since these are one of the most important parts to the rack (adjusting them as we change exercises during a workout) this should be easier. I may try a bit of grease if it doesn't change. As for tools you may need a rubber mallet to punch the rubber floor protectors solidly into place. Once there it seems to stay. Mine came with an hex key but I don't know what for as it was not needed and didnt seem to show up in the instructions. A socket wrench and wrench to do the bolt work is a must. Took about 30 minutes to set up. Once set up and the equipment lays on the rack you feel the solid build. If it weren't for that slight niggle with the uprights I'd give this 5/5 no question.
-
So solidMy Mrs bought me this for my Bday. Its brilliant, no faff, came in 2 boxes that arrived Monday & Tuesday The structure is solid The parts are well made The build is easy Nothing to not like
-
Quality ProductGreat squat rack and excellent value for money given the relatively cheap price compared to other alternatives you could buy. It feels very sturdy although I only have 120kg in weight at home in my garage, for now anyway! I'm also very limited with space to train so this was a great option for me. I had some minor damage to one of the spotter bars and also a plastic insert where the one of the upright barbell rests adjust within the rack. The box was a bit damaged on arrival so I assume this happened during transit. I contacted Mirafit who imediately agreed to replace these parts free of charge and they turned up very promptly. Very pleased overall. Great squat rack and excellent customer service. Would definitely recommend and I intend to buy more Mirafit products when they come back into stock.