Mirafit M3 Power Rack Safety Straps
- Mirafit M3 Power Rack Safety Straps
- Includes a pair of safety straps with steel brackets for attaching to the rack
- Available to suit either 60cm or 90cm deep M3 racks
- Strap safeties greatly reduce noise compared to standard metal spotters and offer additional setup options by allowing you to set the height of the front and rear brackets independently
- Eliminates metal on metal contact with your bar, providing maximum barbell protection
- 60mm wide straps made from heavy duty webbing
- UHMW liners protect the rack against scratching
- Heavy duty 8mm thick steel brackets
- 16mm solid steel pin
- Note: ensure that safety straps are checked regularly and replaced if damaged or worn
- Measurements:
- Strap width: 60mm
- For 60cm rack depth: Strap length is 62cm
- For 90cm rack depth: Strap length is 92cm
5
Share your thoughts with other customers
Top customer reviews
-
Worth the buyThe safety straps work great, prevent any damage to your bar, and are generally a huge upgrade to the default pin/pipe safety arms. Pros: Can make minute adjustments (independently as well, from front to back) to get the perfect height for bench press safety. Light and easy to use and store vs. the large pin/pipe or HDPE-coated safety arm designs. Cons: Because there's a little slack in them, it can take a fair bit of guess work to get the setting just right. Can solve this with marking your favorite positions if needed. Overall - very much worth purchasing. Still undecided if maybe the HDPE-covered straight arm is better, though... I got these because I know I will be moving soon and they're lighter/easier to pack up and transport.
-
PerfectStrong, high quality, easy to fit together. Adds a lot of versatility to the cage. Not sure why I need the metal bars that came with my cage now I have these. Could you offer these as an alternative option when buying a cage?
-
Buy themBeen waiting for these to be released since I bought my power rack and I am not disapointed. They are much faster to set up than the pin and pipe spotters that came with the rack. Also allow for all kinds of pulls and presses from the straps while protecting your barbell. Build quality seems on par with every other Mirafit product I own. Well worth the investment.
-
Just do itI have been waiting for these to come in for a good few months. I wanted them for 2 main reasons: 1) the pin and pipe spotters are a bit annoying when adjusting the height 2) I don't have much of an arch when benching so I occasionally clatter the bar against the spotters. Anyone who has ever done this knows how frustrating it is mid-set. Not great for the barbell either. Needless to say both these problems have now been completely solved. I was a bit concerned I would struggle to get the height right for bench, but because these can be aleterd to different heights front/back then the increments are actually very small. I hope not to be failing many squats but if/when I do I won't have to worry. They took about 5 minutes to put together and you can tell they are built to last. These will never need replacing. If you are thinking about getting these just do it.